115濕膜梳│易高Elcometer│115濕膜測厚儀

產品簡介

英國易高Elcometer 115濕膜梳有公制或者英制可選，厚度范圍Z高可達1270μm 或 50mils。精確度為5% 或 2.5μm (0.01mil)，取更大者。每個濕膜梳有10個測量數值（階齒）

產品型號：115濕膜梳

更新時間：2017-08-18

廠商性質：代理商

訪問量：1728

產品咨詢 13802268624

詳細介紹在線留言

品牌	ELCOMETER/英國易高

如有任何問題請與我司業務專員：
：豪
:fuhao@17Lp.com

英國易高Elcometer 115濕膜梳
這些精密不銹鋼濕膜梳可重復使用，經久耐用.
Elcometer 115 濕膜梳有公制或者英制可選，厚度范圍zui高可達1270μm 或 50mils。精確度為5% 或 2.5μm （0.01mil），取更大者。
每個濕膜梳有10個測量數值（階齒）

使用濕膜梳
將濕膜梳垂直放置，接觸到基體。保持原地等待幾秒鐘，直到梳齒變濕。拿開濕膜梳.

濕膜厚度在"含漆"或"濕"齒zui大值和"不含漆"或"干"齒zui小值之間

How to use a Wet film Comb - Elcometer Wet Film Measurement

ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film comb should be perpendicular to the substrate and the thickness of the coating should be stated as lying between the shortest wet tooth and the longest dry tooth.

Wet film combs have teeth of various lengths on their sides.

Place a comb perpendicular to, and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are "wet." Remove the comb from the film.

The wet film thickness lies between the biggest value "coated" or "wet" tooth and the smallest value "uncoated" or "dry" tooth value

Example

In the diagram, 90 is the biggest value wet tooth and 100 is the smallest value dry tooth. Therefore, the wet film thickness is between 90 and 100 mil/thou.

If the volume to solids ratio of the coating is known （if not contact the coating manufacturer） then the wet film thickness can be used to predict the dry film measurement.

To use combs on pipes, measure along the longitudinal axis （lengthways） of the pipe.

On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness.

符合以下標準
AS/NZS 1580.107.3	ASTM D 4414-A
BS 3900-C5-7B	ISO 2808-1A
ISO 2808-7B	NF T30-125
US Navy NSI 009-32	US Navy PPI 63101-000

Elcometer 115濕膜梳

范圍	階差	部件編號
1 - 13mils	1, 1.5, 2, 3, 4, 5, 7, 9, 11, 13mils	B11529451E
20 - 325μm	20, 35, 50, 75, 100, 125, 175, 225, 275, 225, 275, 325μm	B11529455M
2 - 18mils （51 - 457μm）	2, 3, 4, 6, 8 10, 12, 14, 16, 18mils （51, 76, 102, 152, 203, 254, 305, 356, 406, 457μm）	B11529452
2 - 30mils （51 - 762μm）	2, 4, 6, 8, 10, 10, 15, 20, 25, 30mils （51, 102, 152, 203, 254, 254, 381, 508, 635, 762μm）	B11529453
5 - 50mils （127 - 1270μm）	5, 10, 15, 20, 25, 30, 35, 40, 45, 50mils （127, 254, 381, 508, 635, 762, 889, 1016, 1143, 1270μm）	B11529454